Language:
Sanicondens Best Flat
2-in-1 low profile condensate pump which neutralizes and pumps away condensate.
- Built-in neutralizer to raise pH levels for harsh HVAC applications
- ↑ 15 Ft ↑ and/or ← 150 Ft →
- 500,000 BTU per hour
- Equipped with all necessary hardware for easy installation
The Sanicondens Best Flat is a 2 in 1 condensate pump used to neutralize and pump condensate from condensing boilers, HVAC systems, water heater systems, etc. It is one of the most powerful and quiet condensate pumps on the market with standard features that no competitor can match. The Sanicondens Best Flat will...
See more
Technical data sheet
Technical features of Sanicondens Best Flat | |
---|---|
Application | Neutralization systems |
Part number | 044 |
Max. horizontal discharge | 15 ft |
Max. vertical discharge | 150 ft |
Voltage | 120 V |
Frequency | 60 Hz |
Amperage | 1.5 Amps (Max) |
Motor | 1/30 HP oil-filled thermally protected motor |
Operating temperature | 160°F Max |
Power cord length | 61–1/2 inches |
Noise level (measured at 3 ft.) | ≤ 44 dBA (Lp) |
Discharge pipe diameter | 3 ⁄ 8 ” |
Discharge rate at 15 ft | 30 GPH |
Discharge rate at 3 ft | 86 GPH |
Normal running time | 3-5 seconds (Short bursts) |
Capacity | 0.9 gallons / 3.4 liters |
Inlets diameters | 1” (top), 1” (side) |
Type of activation | Float/microswitch |
Weight | 12 lbs / 5.4 kg |
Certifying agencies | CSA (IPC, NSPC) |
Boiler Capacity up to (BTU/hr) | 500 000 |