Language:
Sanicondens
The easy solution to pump condensate away from condensing boilers and air conditioners
- Suitable for a condensing boiler, HVAC systems, air conditioners
- ↑ 15 Ft ↑ and/or ← 150 Ft →
The Sanicondens is a small pump used to pump condensate from condensing boilers, HVAC systems, water heater systems, etc. The Sanicondens will pump condensate waste up to 15 feet in height and/or 150 feet away from a soil stack.
Condensate has the potential to cause property damage or even create health hazards...
See more
SANICONDENS datasheet
Dimensions (Height x Width x Depth):
6 5/8" x 9 1/2" x 5 5/8"
Column 0 | |
---|---|
Part number | 040 |
Max. horizontal discharge | 15 ft |
Voltage | 120 V |
Frequency | 60 Hz |
Amperage | 1.5 Amps (Max) |
Motor | 1/30 HP oil-filled thermally protected motor |
Operating temperature | 160°F Max |
Power cord length | 60 inches |
Noise level (measured at 3 ft.) | ≤ 44 dBA (Lp) |
Discharge pipe diameter | 3 ⁄ 8 ” |
Discharge rate at 15 ft | 30 GPH |
Discharge rate at 3 ft | 86 GPH |
Normal running time | 3-5 seconds (Short bursts) |
Capacity | 0.5 gallons / 1.9 liters |
Inlets diameters | 1” (top) |
Type of activation | Float/microswitch |
Weight | 7 lbs / 3.1 kg |
Certifying agencies | CSA (IPC, NSPC) |