Language:
SANICOM 1
Heavy-duty drain pump for applications requiring gray water removal
- For commercial applications
- ↑ 25 Ft ↑ and/or ← 250 Ft →
- Can handle multiple fixtures simultaneously
- Capable of handling up to 194°F
The Sanicom 1 drain pump is used to pump gray water away from a variety of fixtures in commercial and residential applications. The system is able to discharge the waste up to 25 feet vertical and/or 250 feet horizontal. This model was designed to sustain the toughest applications from commercial...
See more
SANICOM 1 Data Sheet
Dimensions (Height x Width x Depth):
13” x 17” x 9”
Column 0 | |
---|---|
Part number | 018 |
Max. horizontal discharge | 25 ft |
Max. vertical discharge | 250 ft |
Voltage | 120 V |
Frequency | 60 Hz |
Amperage | 8.3 Amps (Max) |
Motor | 1.3 HP oil-filled thermally protected motor |
Capacitor rating | 45 microfarad |
Operating temperature | 194°F |
Power cord length | 50 inches |
Noise level (measured at 3 ft.) | ≤ 68 dBA (Lp) |
Discharge pipe diameter | 1" |
Discharge rate at 15 ft | @25 Ft : 22 GPM |
Discharge rate at 3 ft | 50 GPM |
Shut-off head | 44 ft |
Normal running time | 4-6 Seconds (Short bursts) |
Capacity | 2.75 gallons / 10.4 liters |
Inlets diameters | 2” (sides) |
Ventilation diameter | 1-1/2"vent (top) |
Type of activation | Pressure switches, Circuit board |
Shower/bath base height | 10” min |
Weight | 22 lbs / 10 kg |
Certifying agencies | CSA (IPC, NSPC), IAPMO (UPC) |
Type de station | A poser |
Complementary products
Regular descaling with specially formulated SANIFLO descaler will prolong the...