Language:
Sanicompact 4C
The Sanicompact 4C is a self-contained dual-flush toilet system used to install a half-bathroom up to 9 feet below the sewer line, or even up to 120 feet away from a soil stack. It incorporates a macerating system which can handle human waste and toilet paper in residential applications. The blade is made out of a hardened stainless-steel material which eliminates the need for any service or replacement.
- A combination of a vitreous porcelain toilet bowl and macerator/pump built into one compact unit.
- Standard dual flush (1 GPF or 1.28 GPF)
- Capable of handling a sink for half-bathroom residential applications.
- Includes soft-close toilet seat.
Technical data sheet
Dimensions (Height x Width x Depth):
16 1/2" x 14 1/2" x 18 1/4"
Column 0 | |
---|---|
Part number | 024 |
Max. horizontal discharge | 9 ft |
Max. vertical discharge | 120 ft |
Voltage | 120 V |
Frequency | 60 Hz |
Amperage | 7.2 Amps (Max) |
Motor | 0.5 HP oil-filled thermally protected motor |
Capacitor rating | 45 microfarad |
Operating temperature | 95°F (110°F Max.) |
Power cord length | 59 inches |
Noise level (measured at 3 ft.) | ≤ 53 dBA (Lp) |
Discharge pipe diameter | 1" |
Discharge rate at 15 ft | @9 Ft : 24 GPM |
Discharge rate at 3 ft | 31 GPM |
Normal running time | 24 sec (18 sec ECO mode) |
Capacity | 0.8 gallons / 0.3 liters |
Inlets diameters | 1–1/4” sink connection (on motor case) |
Type of activation | Push button / circuit board |
Weight | 64 lbs / 29 kg (Bowl with motor) |
Certifying agencies | CSA (IPC, NSPC) |